Previous Page

Print Page

Note: Print in landscape

NICKEL ALLOYS limiting CHEMICAL COMPOSITION based on the UNS designation, strip products

UNS	Generic or manufacturers Name Alloy (xxxx)	Material number EN / DIN	BS Grade	ASTM	AMS	Al	C	Co	Cr	Cu	Fe	Mn	Mo	Ni	P	Si	S	Ti	Others
N02200	alloy 200	2.4066	NA11	B 162			0.15			0.25	0.40	0.35		a(99.0)		0.35	0.010
N02201	alloy 201	2.4068	NA12	B 162	5553		0.02			0.25	0.40	0.35		a (99.0)		0.35	0.010
N04400	alloy 400	2.4360	NA13	B 127	4544		0.30			rem	2.50	2.00		63-70		0.50	0.024
N05500	alloy K500	2.4375	NA18		4676	2.30-3.15	0.25			rem	2.00	1.50		63-70		0.50	0.010	0.35-0.85
N06002	alloy X	2.4665		B 435	5536		0.05-0.15	0.5-2.5	20.5-23		17-20	1.00	8-10	rem	0.040	1.00	0.030		W 0.20-1.0
N06022	alloy C22	2.4602		B 575			0.015	2.50	20-22.5		2.0-6.0	0.50	12.5-14.5	rem	0.020	0.080	0.020		V 0.35 ; W 2.5-3.5
N06075	Nimonicd 75	2.4951					0.08-0.15		18-21	0.50	5.0	1.00		rem		1.00		0.20-0.60
N06200	alloy C2000	2.4675		B 575		0.50	0.010	2.0	22-24	1.3-1.9	3.0	0.50	15-17	rem	0.025	0.080	0.010
N06600	alloy 600	2.4816	NA14	B 168	5540		0.15		14-17	0.50	6-10	1.00		a (72.0)		0.50	0.015
N06601	alloy 601	2.4851	-	B 168	5870	1.0-1.7	0.10		21-25	1.0	rem	1.00		58-63		0.50	0.015
N06625	alloy 625	2.4856	NA21	B 443	5599	0.40	0.10		20-23		5.0	0.50	8-10	rem	0.015	0.50	0.015	0.40	Cb 3.15-4.15
N07214	HAYNES  214 e	2.4646				4.0-5.0	0.050	2.0	15-17		2.0-4.0	0.50	0.50	rem	0.015	0.20	0.015	0.50	B 0.006; W 0.50 Y 0.002-0.040; Zr 0.05
N07718	alloy 718	2.4668		B 670	5596	0.20-0.80	0.080	1.00	17-21	0.30	rem	0.35	2.8-3.0	50-55	0.015	0.35	0.015	0.65-1.15	Cb 4.75-5.50 ; B 0.006
N07750	alloy X750	2.4669	-	B 637	5598	0.40-1.0	0.080	0.7-1.2	14-17	0.50	5-9	1.00		a (70.0)		0.50	0.010	2.25-2.75	Cb 0.70-1.20
N08800	alloy 800	1.4876	NA15	B 409	5871	0.15-0.60	0.10		19-23	0.75	rem	1.50		30-35		1.0	0.015	0.16-0.60

The chemical compositions shown are for identification purposes only and should not be used in place of individual manufacturer’s specifications.

Notes : (a) minimum value (b) nominal value (c) trade mark of Carpenter Technologies (d) trade mark of Special Metals (e) trade mark of Haynes International, Inc (f) trade mark of Elgiloy Speciality Metals

NICKEL ALLOYS limiting CHEMICAL COMPOSITION based on the UNS designation, strip products

UNS	Generic or manufacturers Name Alloy (xxxx)	Material number EN / DIN	BS Grade	ASTM	AMS	Al	C	Co	Cr	Cu	Fe	Mn	Mo	Ni	P	Si	S	Ti	Others
N08810	alloy 800H	1.4958				“	0.05-0.10		“	“	“	“		“		“	“	“
N08811	alloy 800HT	1.4959				“	0.06-0.10		“	“	39.5 min	“		“		“	“	“	Ti + Al = 0.85-1.20
N08825	alloy 825	2.4858	NA16	B 424		0.20	0.050		19.5-23.5	1.5-3.0	rem	1.00	2.5-3.5	38-46	0.030	0.50	0.030	0.6-1.20
N10276	alloy C276	2.4819		B 575			0.020	2.50	14.5-16.5		4-7	1.00	15-17	rem	0.030	0.080	0.030		V 0.035 ; W 3.0-4.5
N10675	alloy B3	2.4600		B 333		0.50	0.010	3.0	1.0-3.0	0.20	1.0-3.0	3.00	27-32	a (65.0)	0.030	0.10	0.010	0.20	Cb 0.20 ; Ta 0.20 ; V 0.20   W 3.0; Zr 0.10; Ni+Mo 94-98
R30003	Elgiloy f				5833		0.15	39-41	19-21		rem	1.5-2.5	6.0-8.0	15-16					Be 1.0
R30605	HAYNES e 25				5537		0.05-0.15	rem	19-21		3.0	1.0-2.0		9.0-11		0.40	0.030		W 14-16
K93600	Nilo d alloy 36	1.3912		B 388			0.10	1.0	0.50		rem	0.60	0.50	35-38	0.025	0.35	0.025
K94100	Nilo d alloy 42	1.3917		F 30 (42)		0.10	0.050		0.25		rem	0.80		(41)b	0.025	0.30	0.025
K94610	Kovar c alloy 29/18	1.3981		F 15		0.10	0.040	(17)b	0.20	0.20	(53)b	0.50	0.20	(29)b		0.20		0.10	Mg 0.10; Zr 0.10 Al+Mg+Zr+Ti = 0.20

The chemical compositions shown are for identification purposes only and should not be used in place of individual manufacturer’s specifications.

Notes : (a) minimum value (b) nominal value (c) trade mark of Carpenter Technologies (d) trade mark of Special Metals (e) trade mark of Haynes International, Inc (f) trade mark of Elgiloy Speciality Metals